Enumerations | Functions
BCDS_BSP_LoRa_RN2xx3.h File Reference
#include "BCDS_HAL.h"
+ Include dependency graph for BCDS_BSP_LoRa_RN2xx3.h:
+ This graph shows which files directly or indirectly include this file:

Enumerations

enum  BSP_LoRa_RN2xx3_Retcode_E
 

Functions

Retcode_T BSP_LoRa_RN2xx3_ChangeBaudrate (uint32_t baudrate)
 Changes the baudrate of the communication interface. More...
 
Retcode_T BSP_LoRa_RN2xx3_Connect (void)
 Maps the GPIO pins to their desired function. More...
 
Retcode_T BSP_LoRa_RN2xx3_Disable (void)
 Disables the control over the peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_Disconnect (void)
 Disconnects the LPWAN (LoRa) peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_Enable (void)
 Enables the control over the peripheral. More...
 
HWHandle_T BSP_LoRa_RN2xx3_GetUartHandle (void)
 Returns the UART handle of the communication interface used by the peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_SetResetPin (uint32_t state)
 Sets the reset pin of the module to the desired state Low or High. More...
 
Retcode_T BSP_LoRa_RN2xx3_WakeUp (void)
 Sends wake-up signal to the LoRa module. More...
 

This documentation file has been automatically generated on Fri Oct 4 2019 03:47:27 by doxygen 1.8.8