Macros | Functions
BSP_LoRa_RN2xx3.c File Reference

Implementation of LoRa/HSPA cellular BSP functions. More...

#include "BCDS_BSP.h"
#include "BCDS_HAL.h"
#include "BSP_BoardType.h"
#include "BSP_BoardExtSettings.h"
#include "BSP_BoardShared.h"
#include "BSP_LoRa_RN2xx3.h"
#include "BCDS_BSP_LoRa_RN2xx3.h"
#include "BCDS_MCU_UART_Handle.h"
#include "BSP_ExtensionPort.h"
#include "em_usart.h"
+ Include dependency graph for BSP_LoRa_RN2xx3.c:

Macros

#define BCDS_MODULE_ID   BCDS_BSP_MODULE_ID_LORA_RN2XX3
 

Functions

static void BreakAndSync (uint32_t baudrate)
 
Retcode_T BSP_LoRa_RN2xx3_ChangeBaudrate (uint32_t baudrate)
 Changes the baudrate of the communication interface. More...
 
Retcode_T BSP_LoRa_RN2xx3_Connect (void)
 Maps the GPIO pins to their desired function. More...
 
Retcode_T BSP_LoRa_RN2xx3_Disable (void)
 Disables the control over the peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_Disconnect (void)
 Disconnects the LPWAN (LoRa) peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_Enable (void)
 Enables the control over the peripheral. More...
 
HWHandle_T BSP_LoRa_RN2xx3_GetUartHandle (void)
 Returns the UART handle of the communication interface used by the peripheral. More...
 
Retcode_T BSP_LoRa_RN2xx3_SetResetPin (uint32_t state)
 Sets the reset pin of the module to the desired state Low or High. More...
 
Retcode_T BSP_LoRa_RN2xx3_WakeUp (void)
 Sends wake-up signal to the LoRa module. More...
 

Macro Definition Documentation

#define BCDS_MODULE_ID   BCDS_BSP_MODULE_ID_LORA_RN2XX3

Function Documentation

static void BreakAndSync ( uint32_t  baudrate)
static

+ Here is the caller graph for this function:


This documentation file has been automatically generated on Fri Oct 4 2019 03:47:26 by doxygen 1.8.8