Macros | Functions
AppController.h File Reference

Configuration header for the AppController.c file. More...

#include "XDK_Utils.h"
+ Include dependency graph for AppController.h:
+ This graph shows which files directly or indirectly include this file:

Macros

#define APP_CONTROLLER_BLE_DEVICE_NAME   "XDK_BLE_APP"
 
#define APP_CONTROLLER_BLE_END_ID   "end"
 
#define APP_CONTROLLER_BLE_END_PAYLOAD   "Transfer Terminated!"
 
#define APP_CONTROLLER_BLE_START_ID   "start"
 
#define APP_CONTROLLER_BLE_START_PAYLOAD   "X Y Z"
 
#define APP_CONTROLLER_BLE_TX_DELAY   UINT32_C(1000)
 

Functions

void AppController_Init (void *cmdProcessorHandle, uint32_t param2)
 Gives control to the Application controller. More...
 

Macro Definition Documentation

#define APP_CONTROLLER_BLE_DEVICE_NAME   "XDK_BLE_APP"

APP_CONTROLLER_BLE_DEVICE_NAME is the BLE device name.

#define APP_CONTROLLER_BLE_END_ID   "end"

APP_CONTROLLER_BLE_END_ID is the part of the payload to be received from BLE central to stop streaming data via. BLE.

#define APP_CONTROLLER_BLE_END_PAYLOAD   "Transfer Terminated!"

APP_CONTROLLER_BLE_END_PAYLOAD is the last payload to be sent to the BLE central upon successful reception of APP_CONTROLLER_BLE_END_ID. Must not be more than 20 bytes.

#define APP_CONTROLLER_BLE_START_ID   "start"

APP_CONTROLLER_BLE_START_ID is the part of the payload to be received from BLE central to start streaming data via. BLE.

#define APP_CONTROLLER_BLE_START_PAYLOAD   "X Y Z"

APP_CONTROLLER_BLE_START_PAYLOAD is the first payload to be sent to the BLE central upon successful reception of APP_CONTROLLER_BLE_START_ID. Must not be more than 20 bytes.

#define APP_CONTROLLER_BLE_TX_DELAY   UINT32_C(1000)

APP_CONTROLLER_BLE_TX_DELAY is the BLE packet transmit frequency in milli second.


This documentation file has been automatically generated on Wed May 6 2020 20:45:05 by doxygen 1.8.8