Macros | Functions
AppController.h File Reference

Configuration header for the AppController.c file. More...

#include "XDK_Utils.h"
+ Include dependency graph for AppController.h:
+ This graph shows which files directly or indirectly include this file:

Macros

#define APP_IS_SIGFOX_DATA_EXCHANGE_SINGLE_SHOT   true
 
#define APP_SENSOR_ACCEL   true
 
#define APP_SENSOR_GYRO   true
 
#define APP_SENSOR_HUMIDITY   true
 
#define APP_SENSOR_LIGHT   true
 
#define APP_SENSOR_PRESSURE   true
 
#define APP_SENSOR_TEMP   true
 
#define APP_TEMPERATURE_OFFSET_CORRECTION   (-3459)
 

Functions

void AppController_Init (void *cmdProcessorHandle, uint32_t param2)
 Gives control to the Application controller. More...
 

Macro Definition Documentation

#define APP_IS_SIGFOX_DATA_EXCHANGE_SINGLE_SHOT   true

APP_IS_SIGFOX_DATA_EXCHANGE_SINGLE_SHOT is a boolean. If "true" then data exchange using Sigfox happens only once. If "false" then data exchange using Sigfox will happen for every APP_SIGFOX_SEND_INTERVAL_IN_MS interval.

#define APP_SENSOR_ACCEL   true

APP_SENSOR_ACCEL is a boolean. If "true" then Accel sensor data is communicated to the server and if "false" not

#define APP_SENSOR_GYRO   true

APP_SENSOR_GYRO is a boolean. If "true" then Gyro sensor data is communicated to the server and if "false" not

#define APP_SENSOR_HUMIDITY   true

APP_SENSOR_HUMIDITY is a boolean. If "true" then Humidity sensor data is communicated to the server and if "false" not

#define APP_SENSOR_LIGHT   true

APP_SENSOR_LIGHT is a boolean. If "true" then Light sensor data is communicated to the server and if "false" not

#define APP_SENSOR_PRESSURE   true

APP_SENSOR_PRESSURE is a boolean. If "true" then Pressure sensor data is communicated to the server and if "false" not

#define APP_SENSOR_TEMP   true

APP_SENSOR_TEMP is a boolean. If "true" then Temperature sensor data is communicated to the server and if "false" not

#define APP_TEMPERATURE_OFFSET_CORRECTION   (-3459)

APP_TEMPERATURE_OFFSET_CORRECTION is the Temperature sensor offset correction value (in mDegC). Unused if APP_SENSOR_TEMP is false. This is the Self heating, temperature correction factor.


This documentation file has been automatically generated on Wed May 6 2020 20:45:05 by doxygen 1.8.8