Macros
HMI board pins

Settings used for the HMI's - LED's and Buttons contained in the board. More...

+ Collaboration diagram for HMI board pins:

Macros

#define KEY1_EDGE_FALLING   true
 
#define KEY1_EDGE_RISING   true
 
#define KEY1_MODE   (gpioModeInputPullFilter)
 
#define KEY1_PIN   (9)
 
#define KEY1_PORT   (gpioPortE)
 
#define KEY1_PULL   (1)
 
#define KEY2_EDGE_FALLING   true
 
#define KEY2_EDGE_RISING   true
 
#define KEY2_MODE   (gpioModeInputPullFilter)
 
#define KEY2_PIN   (14)
 
#define KEY2_PORT   (gpioPortE)
 
#define KEY2_PULL   (1)
 
#define LED_ORANGE_PWM_PIN   (1)
 
#define LED_ORANGE_PWM_PORT   (gpioPortB)
 
#define LED_RED_PWM_PIN   (12)
 
#define LED_RED_PWM_PORT   (gpioPortA)
 
#define LED_YELLOW_PWM_PIN   (0)
 
#define LED_YELLOW_PWM_PORT   (gpioPortB)
 

Detailed Description

Warning
Please do not change these settings, since these are specific to hardware

Macro Definition Documentation

#define KEY1_EDGE_FALLING   true
#define KEY1_EDGE_RISING   true
#define KEY1_MODE   (gpioModeInputPullFilter)
#define KEY1_PIN   (9)
#define KEY1_PORT   (gpioPortE)
#define KEY1_PULL   (1)
#define KEY2_EDGE_FALLING   true
#define KEY2_EDGE_RISING   true
#define KEY2_MODE   (gpioModeInputPullFilter)
#define KEY2_PIN   (14)
#define KEY2_PORT   (gpioPortE)
#define KEY2_PULL   (1)
#define LED_ORANGE_PWM_PIN   (1)
#define LED_ORANGE_PWM_PORT   (gpioPortB)
#define LED_RED_PWM_PIN   (12)
#define LED_RED_PWM_PORT   (gpioPortA)
#define LED_YELLOW_PWM_PIN   (0)
#define LED_YELLOW_PWM_PORT   (gpioPortB)

This documentation file has been automatically generated on Wed May 6 2020 20:45:21 by doxygen 1.8.8