Data Fields
bme280_t Struct Reference

This structure holds BME280 initialization parameters.

#include <bme280.h>

+ Collaboration diagram for bme280_t:

Data Fields

struct bme280_calibration_param_t cal_param
u8 chip_id
u8 config_reg
u8 ctrl_hum_reg
u8 ctrl_meas_reg
void(* delay_msec )(BME280_MDELAY_DATA_TYPE)
u8 dev_addr
u8 oversamp_humidity
u8 oversamp_pressure
u8 oversamp_temperature

Field Documentation


bus read function pointer


bus write function pointer

struct bme280_calibration_param_t cal_param

calibration parameters

u8 chip_id

chip id of the sensor

u8 config_reg

status of configuration register

u8 ctrl_hum_reg

status of control humidity register

u8 ctrl_meas_reg

status of control measurement register

void(* delay_msec)(BME280_MDELAY_DATA_TYPE)

delay function pointer

u8 dev_addr

device address of the sensor

u8 oversamp_humidity

humidity over sampling

u8 oversamp_pressure

pressure over sampling

u8 oversamp_temperature

temperature over sampling

The documentation for this struct was generated from the following file:

This documentation file has been automatically generated on Fri Oct 4 2019 03:47:47 by doxygen 1.8.8